Steel Tilting Skip Bins available in 2 x capacities 250 and 400 kg as well as with a drainage tap (25 mm Diameter) and perforated base for wet waste such as swarf mixed in with coolant. For additional mobility options these UK manufactured bins can also be fitted with fork pockets Dimensions 125 × 40 mm.
Steel Tilting Skip Bins
- Tilting Skip Bins capacity 400 or 250 kg.
- Fabricated sheet steel body mounted on square frame chassis.
- Reinforced body rim.
- No sharp edges.
- Fork Pocket Code SB/FP (125 × 40 mm)
- Handle for pushing and load dumping.
- Load will not tip until the operator releases the retaining latch.
- Welded fork guides available as an option.
- 200 diameter wheels axle mounted front with single rear swivel castor, fitted with solid rubber tyres and roller bearings.
Download and view the Tilting Skip information here
Product Code | SB08 |
Capacity (UDL - kg) | 250 |
Overall width (mm) | 850 |
Overall height (mm) | 790 |
Overall length (mm) | 1175 |
Product Code | SB10 |
Capacity (UDL - kg) | 400 |
Capacity (UDL - kg) | 400 |
Overall width (mm) | 900 |
Overall height (mm) | 970 |
Overall length (mm) | 1320 |
Tilting Skip Bin with Perforated Base and Drain Tap
Tilting Skip Bin with Perforated Base and Drain Tap, 400 and 250 kg capacities. Fabricated sheet steel body mounted on square frame chassis. Reinforced body rim. No sharp edges.. Handle for pushing and load dumping.
Drainage valve 25 mm Diameter
Load will not tip until the operator releases the retaining latch. Welded fork guides available as an option(SB/FP).
200 diameter wheels axle mounted front with single rear swivel castor, fitted with solid rubber tyres and roller bearings.
Product Code | SB08DT |
Capacity (UDL - kg) | 250 |
Overall width (mm) | 850 |
Overall height (mm) | 790 |
Overall length (mm) | 1175 |
Product Code | SB10DT |
Capacity (UDL - kg) | 400 |
Capacity (UDL - kg) | 400 |
Overall width (mm) | 900 |
Overall height (mm) | 970 |
Overall length (mm) | 1320 |
Fork Pockets can be fitted to the SB08 and SB10 tilting skip bins.
Boat Skips with Automatic Tilting
Transport of earth, rubble, waste or other materials (maximum density = 2.4).
Equipped with the new pull-down bale arm, it offers three advantages.
- Laying on the ground, bale arm in rear position, the upper part of the skip is cleared to allow an easy access and loading.
- In discharge position, the skip tilts in vertical position to make a quick and complete discharge.
- The crane operator handles the skip himself for full circles of loading, transport and unloading operations.
- Reduced risks of bale arm blocked on non-flat ground
- Side sliding guidelines closed to prevent sludge or rocks from blocking the bale arm mechanism
- Reinforced bucket
No human intervention on the ground is necessary to help during the unloading operation. It is easy for the crane operator to go from one position to another by simply shifting and rising the crane hook. The reverse operation is possible as well.